Use this guide with the calculator

Start with Quick comparison, review Step 2 assumptions, then read Results and Your break-even point. Change uncertain inputs to see whether the result stays stable or becomes financially close.

Required repair life

The additional years a repair needs to buy to match replacement on annualized cost. This is a useful-life comparison, not a fixed-period total-cost forecast.

Repair menus let you select more than one priced repair example and apply an estimate. These are starting points, not local quotes. Shared labor can make a combined quote lower than the sum, so replace the estimate with a written quote. Replacement menus show dated price examples or ranges where available; check whether they include installation, delivery, taxes, fees, and required extras. Choosing a price does not verify equipment performance or future costs.

Worked example buttons load editable inputs. Review every assumption before treating an example as your situation.

Review example inputs and sourced cost references

Try the calculator's worked examples

These use the same saved inputs as the calculator's example buttons. Load one, then change its assumptions.

    Quick answer

    A repair makes more financial sense when a modest repair buys several credible years of additional service. Replacement gets stronger when the repair is expensive, expected remaining life is short, repeated failures are likely, or the new appliance meaningfully lowers operating costs.

    Compare your numbers →

    Why the “50% rule” is too crude

    You will often hear a rule such as “replace the appliance if the repair costs more than half of a new one.” It is easy to remember, but it hides the variable that matters most: how much additional useful life the repair is likely to buy.

    A $500 repair that credibly buys five more years can be a different decision from the same $500 repair on an appliance likely to fail again next year. The replacement price matters too, but price alone does not tell you the value of the repair.

    Compare cost per expected useful year

    The calculator annualizes each immediate choice instead of pretending that a repaired old appliance and a brand-new appliance have the same remaining life.

    Repair cost per expected year = repair quote ÷ additional years after repair + current annual operating cost
    Replace cost per expected year = all-in replacement cost ÷ expected new-appliance life + new annual operating cost

    This is deliberately simple. It makes your lifespan assumptions visible instead of burying them inside a rule of thumb.

    The breakeven question is more useful

    Instead of asking whether a repair is “too expensive,” ask: How many additional years does this repair need to buy before it is competitive with replacement?

    If your repair needs to last only 1.5 years to break even and the technician believes the rest of the appliance is in good condition, the repair case is stronger. If it needs six more years from a machine already experiencing repeated failures, replacement may be more defensible.

    Use actual replacement cost, not the advertised price

    Delivery, installation, haul-away, required hoses or cords, cabinetry changes, and taxes can make the replacement decision more expensive than the sticker price. Include costs that are truly required for the option you are considering.

    Energy savings are real—but use them carefully

    The FTC's EnergyGuide labels show estimated annual energy use or operating cost for many major appliances and make it easier to compare similar models. The FTC also cautions that the annual operating cost on the label is an estimate based on standardized use and energy prices; your actual cost depends on how you use the appliance and your local utility rate.

    That makes EnergyGuide a useful input, not a promise. For a refrigerator that runs continuously, operating-cost differences may matter more than they do for an appliance used only occasionally.

    Reliability and downtime are legitimate costs

    The calculator does not invent a dollar value for a future breakdown. But repeated failures, hard-to-find parts, food loss from a refrigerator outage, laundromat trips, missed work, or long service delays can matter. If the dollar result is close, those practical costs can reasonably drive the decision.

    Use a range instead of one lifespan guess

    Run the calculator at an optimistic and pessimistic repaired-life estimate. If “repair” wins only when you assume five more years but “replace” wins at two or three years, you have identified the real uncertainty. The next useful question for the technician is not “Is this worth fixing?” but “What else is likely to fail, and how confident are you that this repair buys several more years?”

    Appliance example

    A $550 dishwasher repair expected to buy three more years versus a $1,600 replacement.

    Base caseRun the calculator with the best numbers you have today.
    Stress testChange the one or two assumptions you are least sure about.

    Edge case worth testing

    Test a scarce-parts case where the repair is cheap but downtime or a second failure is more likely.

    Run the decision with your numbers

    Use your repair quote, realistic replacement cost, operating costs, and expected useful life. The calculator shows cost per expected year and the repaired-life breakeven.

    Open the Appliance Repair vs. Replace Calculator →

    What actually changes the answer?

    The repair quote, credible years of life after repair, all-in replacement cost, expected replacement life, and operating-cost difference usually move the modeled result most.

    What this model does not include

    It does not predict the next failure, parts availability, downtime, food loss, warranty value, or exact appliance lifespan. Those practical factors can outweigh a small modeled cost gap.

    Sources

    The appliance-type starter lives in the calculator are unsupported illustrative planning defaults, not verified category averages or model-specific predictions. Replace them with model-specific information and test a shorter-life case. Expected useful life is uncertain and model-specific. The calculator intentionally asks you to enter and test that assumption rather than presenting a universal lifespan as fact.